1. Detailed inspection of each component shall meet the corresponding standards.

2. The perpendicularity of the two end surfaces of the gear and the shaft centerline and the parallelism of the two end surfaces of the gear should be qualified; the gear meshing condition is good.

3. The shaft diameter should meet the technical requirements, and the coaxiality between the shaft sleeve or bearing and the shaft diameter is qualified.

4. Adjust the gear end clearance properly.

5. When tightening the end bolts, use symmetrical and even force; move the rotor tightly. If you get stuck, loosen the bolts and tighten again.

6. When packing is tightly pressed, the rotor needs to be moved while tightening tightly.


Zhejiang Yongling Hydraulic Machine Co , Ltd . is a professional China manufacturer and supplier of    Internal Gear Pumps   . Our series of internal gear pumps feature high working pressure, high volumetric efficiency, and low noise. Our products are widely used in cutting, plastic, forging, engineering, leather, pressure, metallurgy, agriculture, transportation machinery and machine tools, hydraulic stations, automatic production lines and other fields. Welcome to buy: https://www.china-vanepump.com/product/internal-gear-pumps/