100w Street Light Housing Wholesale Introduction The industrial and mining lamp housing can be divided into general lighting and partial lighting according to the lighting function. General lighting lamps are generally evenly placed on the upper or side walls of the work site to illuminate the entire working surface. It is necessary to use incandescent lamps with high power, tungsten halogen lamps, high-intensity gas discharge lamps or a large number of fluorescent lamps. The vast majority of industrial and mining lamp housings are of this type. General lighting has a high demand for light distribution. Two types of light distribution, direct lighting and semi-direct lighting, are widely used, especially the latter. In the semi-direct lighting type, part of the upwardly announced light illuminates the ceiling, which can add the brightness of the ceiling and create a more comfortable and brighter environment.

Partial lighting is a kind of luminaire that improves the illuminance of a certain working part. Its effect can be to strengthen and supplement the lighting on the basis of general lighting, or it can be used as temporary lighting in some places where lighting is not usually needed (such as equipment maintenance and maintenance places). There are no strict rules for their light distribution. Part of the lighting is generally installed near the working area, using incandescent lamps and tungsten halogen lamps with safe extra-low voltage (≤50V, effective communication value) as the light source. There are (portable) running lights, hanging lights, work desk lights, machine work lights, etc. In some huge factories, spotlights are sometimes used for partial lighting.

Although the LED industrial and mining lamp housing also has many shortcomings, such as the fact that the standard is true, leading to increased maintenance costs for manufacturers. However, since the packaging technology of LED light source products has been continuously improved and the heat dissipation technology has been continuously developed in recent years, the stability of the light source has reached a relatively good level. Even if there is that, it is light decay and color drift, which is mainly caused by the unreasonable heat dissipation design. There are very few cases of direct necrosis. Relatively speaking, ordinary light sources are much more serious.

The above content is organized and shared by Ninghai Ethan Lighting Technology Co,.Ltd. , hoping to help those in need.