Change Language
English - Change Language
Recent Updates
  • China Passenger Elevator Factory Introduces How To Use Elevators Correctly

    China Passenger Elevator Factory introduces the requirements for the use of home elevators:

    1. Keep the elevator car clean. Smoking is forbidden in the passenger compartment, and do not discard snacks or fruit and other residues in the elevator car to prevent debris and other debris from entering the gap of the car door sill and causing equipment damage.

    2. Keep the elevator car dry. Do not bring umbrellas and rain boots with running water into the car. One is to prevent the car floor from getting wet and causing people to slip; the other is to prevent water from entering the hoistway along the elevator sill gap and causing electrical appliances. The device is short-circuited.

    3. The elevator cannot be started. Don't try to stop the car from closing with your hands, feet or crutches, sticks, sticks, etc., so as not to affect the elevator structure and cause danger.

    4. Elevator failure should be handled calmly. When the elevator fails or some accidents occur, you should not panic, let alone press the buttons in the elevator, you should call for help in time or press the emergency bell.

    5. When the elevator is running abnormally, the professional manufacturer should be notified in time for inspection and repair, and it must not be repaired without authorization.

    Through the above introduction, China Elevator Lifts Factory hopes that you can simply refer to the content of this article in future use.

    China Passenger Elevator Factory Introduces How To Use Elevators Correctly China Passenger Elevator Factory introduces the requirements for the use of home elevators: 1. Keep the elevator car clean. Smoking is forbidden in the passenger compartment, and do not discard snacks or fruit and other residues in the elevator car to prevent debris and other debris from entering the gap of the car door sill and causing equipment damage. 2. Keep the elevator car dry. Do not bring umbrellas and rain boots with running water into the car. One is to prevent the car floor from getting wet and causing people to slip; the other is to prevent water from entering the hoistway along the elevator sill gap and causing electrical appliances. The device is short-circuited. 3. The elevator cannot be started. Don't try to stop the car from closing with your hands, feet or crutches, sticks, sticks, etc., so as not to affect the elevator structure and cause danger. 4. Elevator failure should be handled calmly. When the elevator fails or some accidents occur, you should not panic, let alone press the buttons in the elevator, you should call for help in time or press the emergency bell. 5. When the elevator is running abnormally, the professional manufacturer should be notified in time for inspection and repair, and it must not be repaired without authorization. Through the above introduction, China Elevator Lifts Factory hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • China Passenger Elevator Factory Introduces The Process Of Repairing Elevators
    Household mini elevators have become more and more common in today's life. So how to properly maintain it? Let’s follow the China Passenger Elevator Factory to learn about how to maintain home elevators:

    1. Check the elevator regularly
    In order to ensure that the home mini elevator can be used smoothly without any danger, after using the elevator for a period of time, an inspection must be carried out. The purpose of this inspection is to ensure that there are no problems with the controller, starter, and other structures. There will be no problems with the operation of the elevator, and the period of regular inspection cannot exceed 12 months, and professional personnel is required to conduct inspections, so as to ensure the safety of the elevator.

    2. Check the structure
    Because the home mini elevator is one of the important equipment, in order to ensure safety during use, there are many things that need to be paid attention to. In the process of daily maintenance, it is necessary to carry out detailed inspections on some structures of the elevator. For example, door lock devices, continuity of use, alarm systems, driving devices, etc., these functions and structures must be strictly tested to avoid any serious failures that may lead to accidents during use.

    Through the above introduction, Passenger Elevator Factory hopes that you can simply refer to the content of this article in future use.

    China Passenger Elevator Factory Introduces The Process Of Repairing Elevators Household mini elevators have become more and more common in today's life. So how to properly maintain it? Let’s follow the China Passenger Elevator Factory to learn about how to maintain home elevators: 1. Check the elevator regularly In order to ensure that the home mini elevator can be used smoothly without any danger, after using the elevator for a period of time, an inspection must be carried out. The purpose of this inspection is to ensure that there are no problems with the controller, starter, and other structures. There will be no problems with the operation of the elevator, and the period of regular inspection cannot exceed 12 months, and professional personnel is required to conduct inspections, so as to ensure the safety of the elevator. 2. Check the structure Because the home mini elevator is one of the important equipment, in order to ensure safety during use, there are many things that need to be paid attention to. In the process of daily maintenance, it is necessary to carry out detailed inspections on some structures of the elevator. For example, door lock devices, continuity of use, alarm systems, driving devices, etc., these functions and structures must be strictly tested to avoid any serious failures that may lead to accidents during use. Through the above introduction, Passenger Elevator Factory hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • China Passenger Elevator Factory Introduces The Process Of Repairing Elevators


    Household mini elevators have become more and more common in today's life. So how to properly maintain it? Let’s follow the China Passenger Elevator Factory to learn about how to maintain home elevators:

    1. Check the elevator regularly
    In order to ensure that the home mini elevator can be used smoothly without any danger, after using the elevator for a period of time, an inspection must be carried out. The purpose of this inspection is to ensure that there are no problems with the controller, starter, and other structures. There will be no problems with the operation of the elevator, and the period of regular inspection cannot exceed 12 months, and professional personnel is required to conduct inspections, so as to ensure the safety of the elevator.

    2. Check the structure
    Because the home mini elevator is one of the important equipment, in order to ensure safety during use, there are many things that need to be paid attention to. In the process of daily maintenance, it is necessary to carry out detailed inspections on some structures of the elevator. For example, door lock devices, continuity of use, alarm systems, driving devices, etc., these functions and structures must be strictly tested to avoid any serious failures that may lead to accidents during use.

    Through the above introduction, China Elevator Lifts Factory hopes that you can simply refer to the content of this article in future use.

    China Passenger Elevator Factory Introduces The Process Of Repairing Elevators Household mini elevators have become more and more common in today's life. So how to properly maintain it? Let’s follow the China Passenger Elevator Factory to learn about how to maintain home elevators: 1. Check the elevator regularly In order to ensure that the home mini elevator can be used smoothly without any danger, after using the elevator for a period of time, an inspection must be carried out. The purpose of this inspection is to ensure that there are no problems with the controller, starter, and other structures. There will be no problems with the operation of the elevator, and the period of regular inspection cannot exceed 12 months, and professional personnel is required to conduct inspections, so as to ensure the safety of the elevator. 2. Check the structure Because the home mini elevator is one of the important equipment, in order to ensure safety during use, there are many things that need to be paid attention to. In the process of daily maintenance, it is necessary to carry out detailed inspections on some structures of the elevator. For example, door lock devices, continuity of use, alarm systems, driving devices, etc., these functions and structures must be strictly tested to avoid any serious failures that may lead to accidents during use. Through the above introduction, China Elevator Lifts Factory hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • Passenger Elevator Factory Shares How To Perform Elevator Component Acceptance


    Passenger Elevator Factory Shares The Role Of Elevator Component Acceptance

    1. Elevator component acceptance requirements The test of safety components must meet the requirements of technical documents and relevant specifications.
    2. Each floor door must be able to be opened normally with a triangle key; when a floor door or car door (any one of multiple doors) is opened abnormally, the elevator is strictly prohibited to start or continue running.
    3. The traction ability of the traction machine meets the requirements.
    4. The elevator running test is qualified, and the reliability is checked in accordance with the specified number of operating hours per hour (not less than 8 hours per day).
    5. Elevator noise, leveling accuracy, running speed and other inspections meet the specifications.
    6. The quality inspection of elevators should meet the requirements. The elevator is installed in a specific vertical shaft passage. During the construction, it is necessary to prevent accidents from accidentally falling from the doorway, and to prevent objects in the shaft from falling or falling from the scaffolding or fire accidents caused by welding. The elevator itself is a vertical and high-speed mechanical equipment. Its safety performance and safety technology have received widespread attention. To make the elevator run safely and meet the needs of operation, the coordinated action of its electromechanical components is one of the keys.

    Through the above introduction, Observation Elevators Manufacturers hopes that you can simply refer to the content of this article in future use.
    Passenger Elevator Factory Shares How To Perform Elevator Component Acceptance Passenger Elevator Factory Shares The Role Of Elevator Component Acceptance 1. Elevator component acceptance requirements The test of safety components must meet the requirements of technical documents and relevant specifications. 2. Each floor door must be able to be opened normally with a triangle key; when a floor door or car door (any one of multiple doors) is opened abnormally, the elevator is strictly prohibited to start or continue running. 3. The traction ability of the traction machine meets the requirements. 4. The elevator running test is qualified, and the reliability is checked in accordance with the specified number of operating hours per hour (not less than 8 hours per day). 5. Elevator noise, leveling accuracy, running speed and other inspections meet the specifications. 6. The quality inspection of elevators should meet the requirements. The elevator is installed in a specific vertical shaft passage. During the construction, it is necessary to prevent accidents from accidentally falling from the doorway, and to prevent objects in the shaft from falling or falling from the scaffolding or fire accidents caused by welding. The elevator itself is a vertical and high-speed mechanical equipment. Its safety performance and safety technology have received widespread attention. To make the elevator run safely and meet the needs of operation, the coordinated action of its electromechanical components is one of the keys. Through the above introduction, Observation Elevators Manufacturers hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • China Elevator Lifts Factory Introduces Related Content Of Energy-Saving Elevators

    Energy-saving elevators have been more than 10 years old. Nowadays, the definition of energy-saving elevators has long been defined by various elevator companies and their customers, and it has also been highly valued by relevant laws and regulations. Then China Elevator Lifts Factory will share how to identify the level of energy-saving elevators. ?

    The appraisal of energy-saving elevator records can be similar to the five-level system for electrical products, or the five-level system of 3A, AA, A, B, and C. If the communication and AC two-speed elevator is Class C, then the pressure relief valve vortex rod VVVF elevator can be Class B. The output power of the permanent magnet synchronous server is smaller than that of the pressure relief valve scroll server. Therefore, the VVVF elevator with permanent magnet synchronous server is selected. Able to be included in the A level.
    1.3A: Permanent magnet synchronous server, VVVF control system, elevator electromagnetic energy generating capacity use more than 40-45%, not immediately impact power grid. This type of elevator is energy-saving and easy to use, and has no impact on the power grid. It is a three-generation energy-saving elevator in the true mature period.

    2.AA: Permanent magnet synchronous server, VVVF operation, can use elevator power generation, such as electric energy feedback, but electric energy feedback must meet the standards of the State Grid access license, with electromagnetic energy rectifier for elevators and electromagnetic Can develop the technicality of sine wave smooth solution, but the wrong power network harms the impact. The feedback utilization rate of electric energy is more than 30-20%. This type of elevator enters the third-generation energy-saving elevator line, but it belongs to the third-type energy-saving elevator that enters the door.

    3.A: Permanent magnet synchronous server, VVVF operation, large-scale application and promotion of this type of elevator has been in recent years, and the sales volume has gradually increased, the sales market share will increase over the years, the power consumption of the province, and the maintenance of the natural environment It is better than the pressure relief valve scroll elevator. It is the core component of today and will once again increase the market share. This type of elevator is the third generation of energy-saving elevators.

    4.B: Pressure relief valve scroll server, operated by VVVF, this type of elevator motor has a higher rated power, but it is more energy-saving than the two-speed communication and communication. It is the second generation of energy-saving elevator technology, but the production is gradually reduced at this stage. There is another market sale on the sales market, which used to be the core component of elevators.

    5.B-C: Communication and communication two-speed operation, pressure relief valve, scroll elevator server, plc or older operation method, the key to this type of elevator is the old elevator and the freight elevator.

    The above content is organized and shared by China Passenger Elevator Factory, hoping to help those in need.
    China Elevator Lifts Factory Introduces Related Content Of Energy-Saving Elevators Energy-saving elevators have been more than 10 years old. Nowadays, the definition of energy-saving elevators has long been defined by various elevator companies and their customers, and it has also been highly valued by relevant laws and regulations. Then China Elevator Lifts Factory will share how to identify the level of energy-saving elevators. ? The appraisal of energy-saving elevator records can be similar to the five-level system for electrical products, or the five-level system of 3A, AA, A, B, and C. If the communication and AC two-speed elevator is Class C, then the pressure relief valve vortex rod VVVF elevator can be Class B. The output power of the permanent magnet synchronous server is smaller than that of the pressure relief valve scroll server. Therefore, the VVVF elevator with permanent magnet synchronous server is selected. Able to be included in the A level. 1.3A: Permanent magnet synchronous server, VVVF control system, elevator electromagnetic energy generating capacity use more than 40-45%, not immediately impact power grid. This type of elevator is energy-saving and easy to use, and has no impact on the power grid. It is a three-generation energy-saving elevator in the true mature period. 2.AA: Permanent magnet synchronous server, VVVF operation, can use elevator power generation, such as electric energy feedback, but electric energy feedback must meet the standards of the State Grid access license, with electromagnetic energy rectifier for elevators and electromagnetic Can develop the technicality of sine wave smooth solution, but the wrong power network harms the impact. The feedback utilization rate of electric energy is more than 30-20%. This type of elevator enters the third-generation energy-saving elevator line, but it belongs to the third-type energy-saving elevator that enters the door. 3.A: Permanent magnet synchronous server, VVVF operation, large-scale application and promotion of this type of elevator has been in recent years, and the sales volume has gradually increased, the sales market share will increase over the years, the power consumption of the province, and the maintenance of the natural environment It is better than the pressure relief valve scroll elevator. It is the core component of today and will once again increase the market share. This type of elevator is the third generation of energy-saving elevators. 4.B: Pressure relief valve scroll server, operated by VVVF, this type of elevator motor has a higher rated power, but it is more energy-saving than the two-speed communication and communication. It is the second generation of energy-saving elevator technology, but the production is gradually reduced at this stage. There is another market sale on the sales market, which used to be the core component of elevators. 5.B-C: Communication and communication two-speed operation, pressure relief valve, scroll elevator server, plc or older operation method, the key to this type of elevator is the old elevator and the freight elevator. The above content is organized and shared by China Passenger Elevator Factory, hoping to help those in need.
    0 Comments 0 Shares
  • China Passenger Elevator Supplier Introduces Elevator Noise Handling Opinions


    Most elevator failures happen inadvertently, so China Passenger Elevator Supplier reminds you to pay attention to the following details when taking the elevator:

    1. Do not lean against, strike, or kick the landing door while waiting for the ladder. It is strictly forbidden to pry open the landing door with objects;

    2. When entering or leaving the car, pay attention to whether the car is level and whether the car and hall doors are fully opened;

    3. Children must be accompanied by an adult when taking the elevator. Never use a long string to draw children or pets;

    4. In the sedan, there should be no jumping, shaking, slapstick, playfulness, loud noise and smoking;

    5. Remember to take flammable, explosive, corrosive, and toxic objects in the elevator;

    6. Pay attention to the sound signal to prevent the elevator from overloading;

    7. Do not take the elevator in case of fire;

    8. In exceptional circumstances, you should keep calm and press the distress call and wait for rescue.

    The above content is organized and shared by China Elevator Lifts Factory , hoping to help those in need.

    China Passenger Elevator Supplier Introduces Elevator Noise Handling Opinions Most elevator failures happen inadvertently, so China Passenger Elevator Supplier reminds you to pay attention to the following details when taking the elevator: 1. Do not lean against, strike, or kick the landing door while waiting for the ladder. It is strictly forbidden to pry open the landing door with objects; 2. When entering or leaving the car, pay attention to whether the car is level and whether the car and hall doors are fully opened; 3. Children must be accompanied by an adult when taking the elevator. Never use a long string to draw children or pets; 4. In the sedan, there should be no jumping, shaking, slapstick, playfulness, loud noise and smoking; 5. Remember to take flammable, explosive, corrosive, and toxic objects in the elevator; 6. Pay attention to the sound signal to prevent the elevator from overloading; 7. Do not take the elevator in case of fire; 8. In exceptional circumstances, you should keep calm and press the distress call and wait for rescue. The above content is organized and shared by China Elevator Lifts Factory , hoping to help those in need.
    0 Comments 0 Shares
  • China Passenger Elevator Suppliers Share Standards For Replacing Elevators In Old Buildings



    Now the old building will implement the old building to replace the elevator, so that the residents of the old building can also enjoy life, so changing the elevator in the old building is not an easy task, so how should the residents in the old building spend this The transition period. Let ’s share some of your experiences with the manufacturers of China Passenger Elevator .

    Elevators have a certain life span. At a certain time, you should change the elevator to avoid the failure of the old elevator to affect people's normal life. Then, in the face of this building, there is only this elevator, and it takes more than 20 days to replace a new one. During the ladder, how old people go downstairs, we should first know that their worries come mainly from three aspects. First of all, I am worried about the diet. The inconvenience of shopping downstairs is the main problem. In addition, some elderly people mentioned that cardiovascular and respiratory diseases are prone to occur in winter, and elevators cannot be used. What should I do in case of an emergency? And, how to deal with daily life waste?

    The treatment method is that the old elevator in the building has been running for nearly 20 years, and it has no value for maintenance. This time, the new work, except for the elevator cable, car and other internal facilities, the elevator doors on each floor must be replaced. The purpose is to completely eliminate hidden dangers and make old people feel at ease. From reinforcement to demolition to replacement, the initial plan took 45 days. Considering the difficulties of the old people, the plan was changed again and again, and it was compressed to within 30 days. And under the premise of not affecting the residents' rest, try to shorten the construction period as much as possible, and strive to complete the construction tasks in a time period when people travel less; the household garbage is collected twice a day, and the residents can put the garbage in the black plastic bag in the corridor, and the food is Reducing people's travel by booking food delivery. There is also a designated security company to answer calls 24 hours a day. In case of emergencies, security personnel will help and escort the elderly down the stairs for medical treatment. Because older people live in the old buildings, temporary seats are added to the elevators. When old people need travel, they are tired of climbing stairs and can rest in the corridor. The old people are satisfied with the above measures and have less anxiety, and now look forward to using the new elevator as soon as possible.

    The above content is organized and shared by China Elevator Lifts Factory , hoping to help more people.
    China Passenger Elevator Suppliers Share Standards For Replacing Elevators In Old Buildings Now the old building will implement the old building to replace the elevator, so that the residents of the old building can also enjoy life, so changing the elevator in the old building is not an easy task, so how should the residents in the old building spend this The transition period. Let ’s share some of your experiences with the manufacturers of China Passenger Elevator . Elevators have a certain life span. At a certain time, you should change the elevator to avoid the failure of the old elevator to affect people's normal life. Then, in the face of this building, there is only this elevator, and it takes more than 20 days to replace a new one. During the ladder, how old people go downstairs, we should first know that their worries come mainly from three aspects. First of all, I am worried about the diet. The inconvenience of shopping downstairs is the main problem. In addition, some elderly people mentioned that cardiovascular and respiratory diseases are prone to occur in winter, and elevators cannot be used. What should I do in case of an emergency? And, how to deal with daily life waste? The treatment method is that the old elevator in the building has been running for nearly 20 years, and it has no value for maintenance. This time, the new work, except for the elevator cable, car and other internal facilities, the elevator doors on each floor must be replaced. The purpose is to completely eliminate hidden dangers and make old people feel at ease. From reinforcement to demolition to replacement, the initial plan took 45 days. Considering the difficulties of the old people, the plan was changed again and again, and it was compressed to within 30 days. And under the premise of not affecting the residents' rest, try to shorten the construction period as much as possible, and strive to complete the construction tasks in a time period when people travel less; the household garbage is collected twice a day, and the residents can put the garbage in the black plastic bag in the corridor, and the food is Reducing people's travel by booking food delivery. There is also a designated security company to answer calls 24 hours a day. In case of emergencies, security personnel will help and escort the elderly down the stairs for medical treatment. Because older people live in the old buildings, temporary seats are added to the elevators. When old people need travel, they are tired of climbing stairs and can rest in the corridor. The old people are satisfied with the above measures and have less anxiety, and now look forward to using the new elevator as soon as possible. The above content is organized and shared by China Elevator Lifts Factory , hoping to help more people.
    0 Comments 0 Shares
  • China Elevator Lifts Factory Introduces How To Use Elevators

    Due to the special requirements of the use environment, home elevators make their own elevator function configuration different from public commercial elevators. Therefore, the configuration function of home electronics is also higher than other elevators. The introduction of China Elevator Lifts Factory is mainly reflected in the following aspects:

    (1) Home elevators are equipped with emergency leveling devices for power failure. Due to the particularity of the use environment of home elevators, there is no duty room monitoring for home elevators, and the phenomenon of power supply tripping caused by power grid blackouts or other factors occurs from time to time. Therefore, I believe that home elevators should be equipped with power failure emergency leveling function as standard. In the event of an unexpected power outage due to the above-mentioned reasons, the standby power supply of the power outage emergency leveling system can automatically start, move the car to the nearest floor and open the door to avoid accidental trapping of personnel.

    (2) Household elevators should be equipped with alarm bells in the car. An alarm bell is required in the car. When the elevator is out of power unexpectedly and the emergency leveling device fails, if there are other people in the home, the other people at home can be notified through the alarm bell to quickly contact for rescue.

    (3) For domestic elevators, an embedded wired telephone should be installed on the control panel in the car. Since the home elevator is installed in the user's house, there is usually no intercom connected to the duty room. When the personnel are trapped in the car, they cannot communicate with the outside world through the intercom. Therefore, it is necessary to configure a telephone in the car to facilitate contact with the outside world when people are trapped. The author recommends that it is best to configure an embedded wired phone, because if you use a wireless phone or mobile phone, it may not be replenished in time after its own power consumption is exhausted, causing this function to fail at a critical moment; if you configure a wall-mounted phone or mobile phone, the former will affect the aesthetics At the same time, it will also occupy the limited use area of ​​the car, which will be artificially taken out of the car because it cannot be reliably fixed. The embedded wired telephone is installed on the control panel, and the emergency power supply of the elevator can be used by the telephone, even if the power fails, the wired telephone can also be used. The phone should also have a one-key speed dial function to facilitate the use of the elderly and children.

    The above content is organized and shared by China Passenger Elevator Factory, hoping to help those in need.

    China Elevator Lifts Factory Introduces How To Use Elevators Due to the special requirements of the use environment, home elevators make their own elevator function configuration different from public commercial elevators. Therefore, the configuration function of home electronics is also higher than other elevators. The introduction of China Elevator Lifts Factory is mainly reflected in the following aspects: (1) Home elevators are equipped with emergency leveling devices for power failure. Due to the particularity of the use environment of home elevators, there is no duty room monitoring for home elevators, and the phenomenon of power supply tripping caused by power grid blackouts or other factors occurs from time to time. Therefore, I believe that home elevators should be equipped with power failure emergency leveling function as standard. In the event of an unexpected power outage due to the above-mentioned reasons, the standby power supply of the power outage emergency leveling system can automatically start, move the car to the nearest floor and open the door to avoid accidental trapping of personnel. (2) Household elevators should be equipped with alarm bells in the car. An alarm bell is required in the car. When the elevator is out of power unexpectedly and the emergency leveling device fails, if there are other people in the home, the other people at home can be notified through the alarm bell to quickly contact for rescue. (3) For domestic elevators, an embedded wired telephone should be installed on the control panel in the car. Since the home elevator is installed in the user's house, there is usually no intercom connected to the duty room. When the personnel are trapped in the car, they cannot communicate with the outside world through the intercom. Therefore, it is necessary to configure a telephone in the car to facilitate contact with the outside world when people are trapped. The author recommends that it is best to configure an embedded wired phone, because if you use a wireless phone or mobile phone, it may not be replenished in time after its own power consumption is exhausted, causing this function to fail at a critical moment; if you configure a wall-mounted phone or mobile phone, the former will affect the aesthetics At the same time, it will also occupy the limited use area of ​​the car, which will be artificially taken out of the car because it cannot be reliably fixed. The embedded wired telephone is installed on the control panel, and the emergency power supply of the elevator can be used by the telephone, even if the power fails, the wired telephone can also be used. The phone should also have a one-key speed dial function to facilitate the use of the elderly and children. The above content is organized and shared by China Passenger Elevator Factory, hoping to help those in need.
    0 Comments 0 Shares
  • China Passenger Elevator Manufacturer Introduces The Elevator Workflow

    China Passenger Elevator manufacturer introduces the working principle of small home elevators

    The operation of small domestic hydraulic elevators is divided into rising and falling. When the elevator is sliding down, the valve group is opened, and the pressure difference generated by the weight of the elevator car makes the gear oil return to the hydraulic oil filter element, so that the elevator car slides down. At this time, the electric hydraulic pump is not laborious.

    When a small domestic elevator rises, the electric hydraulic pump will produce a driving force pressure difference. The valve group in the hydraulic transmission system controls the total amount of gear oil in the pump. When the gear oil enters the main cylinder oil cavity, the gear oil will promote the oil The plunger pump in the cylinder lifts the elevator.

    The above content is organized and shared by China Elevator Lifts Factory , hoping to help those in need.

    China Passenger Elevator Manufacturer Introduces The Elevator Workflow China Passenger Elevator manufacturer introduces the working principle of small home elevators The operation of small domestic hydraulic elevators is divided into rising and falling. When the elevator is sliding down, the valve group is opened, and the pressure difference generated by the weight of the elevator car makes the gear oil return to the hydraulic oil filter element, so that the elevator car slides down. At this time, the electric hydraulic pump is not laborious. When a small domestic elevator rises, the electric hydraulic pump will produce a driving force pressure difference. The valve group in the hydraulic transmission system controls the total amount of gear oil in the pump. When the gear oil enters the main cylinder oil cavity, the gear oil will promote the oil The plunger pump in the cylinder lifts the elevator. The above content is organized and shared by China Elevator Lifts Factory , hoping to help those in need.
    0 Comments 0 Shares
  • Observation Elevators Suppliers Share What Is A Home Elevator


    Now that the number of private houses in villas is increasing, Observation Elevators suppliers have found that more and more people are installing small household elevators in their houses. There are many types of small home elevators, and their functions and effects are also different. If you want to understand it in a short time, it takes some time and energy to make a choice.

    Nowadays, home elevator brands are basically able to customize, and some functions can be selected when using it. Different functions and detailed application conditions may be different. Customers should first understand the common scales of small home elevators. See whether it can be selected to meet these standards.

    If you can’t choose the one you can meet, you can customize it. It’s just to share the detailed planning style, and you need to see how you can use it better. On this issue, customers still need to worry about themselves. Now the manufacturers are doing very well in all services. As long as you want to know about the small home elevators, you can consult the relevant service personnel. Whether it is materials or prices, or detailed installation after-sales operations, they are now doing better.

    The above content is organized and shared by Passenger Elevator Factory , hoping to help those in need.
    Observation Elevators Suppliers Share What Is A Home Elevator Now that the number of private houses in villas is increasing, Observation Elevators suppliers have found that more and more people are installing small household elevators in their houses. There are many types of small home elevators, and their functions and effects are also different. If you want to understand it in a short time, it takes some time and energy to make a choice. Nowadays, home elevator brands are basically able to customize, and some functions can be selected when using it. Different functions and detailed application conditions may be different. Customers should first understand the common scales of small home elevators. See whether it can be selected to meet these standards. If you can’t choose the one you can meet, you can customize it. It’s just to share the detailed planning style, and you need to see how you can use it better. On this issue, customers still need to worry about themselves. Now the manufacturers are doing very well in all services. As long as you want to know about the small home elevators, you can consult the relevant service personnel. Whether it is materials or prices, or detailed installation after-sales operations, they are now doing better. The above content is organized and shared by Passenger Elevator Factory , hoping to help those in need.
    0 Comments 0 Shares
More Stories