Change Language
English - Change Language
Recent Updates
  • An oxygen mask is an emergency rescue device that provides oxygen to passengers. If the cabin suddenly loses airtightness or encounters other hypoxia conditions, passengers can get oxygen masks to supplement oxygen at any time.

    The oxygen mask provides a way to transfer the oxygen needed for breathing from the storage tank to the human lungs. There are mainly medical oxygen masks, aviation oxygen masks and oxygen masks used by airline passengers, which play an important role in treating diseases and protecting the safety of passengers and pilots. Mainly made of plastic, silicone, or rubber.

    After the aircraft reaches a certain altitude, pressurize the cabin. If the aircraft cabin loses pressure, it will cause hypoxia, and passengers will feel dizzy, lose consciousness, and even endanger their lives under hypoxia. In the case of cabin depressurization at different altitudes, the duration of hypoxia that a person can withstand is different. The higher the flight altitude, the less time to withstand. In civil aviation airliners, each person’s seat is equipped with a personal oxygen mask for emergency use, so there is no need to fight to avoid pulling the oxygen mask and delaying use.

    The oxygen mask is connected to the automatic coupling through a slender rubber oxygen supply tube and bayonet joint. Oxygen continuously flows into the air storage bag of the mask. The gas storage bag first stores gas, and when it expands, it can hold a certain amount of oxygen. When the passenger takes a deep breath to inhale the air storage bag, the intake valve on the mask can let in oxygen.

    In the event of decompression in the aircraft cabin, the oxygen mask will automatically be thrown down from the cabin roof. Above the passenger seat, there is an emergency manual release of the oxygen mask and a "push" mark. After pushing open, the oxygen mask will automatically lower in front of the passengers. On the release board, there are graphics and text instructions on how to use it. Passengers should follow the instructions correctly.

    If you need to buy or wholesale oxygen mask mould, please contact us: https://www.medicalmould.net/
    An oxygen mask is an emergency rescue device that provides oxygen to passengers. If the cabin suddenly loses airtightness or encounters other hypoxia conditions, passengers can get oxygen masks to supplement oxygen at any time. The oxygen mask provides a way to transfer the oxygen needed for breathing from the storage tank to the human lungs. There are mainly medical oxygen masks, aviation oxygen masks and oxygen masks used by airline passengers, which play an important role in treating diseases and protecting the safety of passengers and pilots. Mainly made of plastic, silicone, or rubber. After the aircraft reaches a certain altitude, pressurize the cabin. If the aircraft cabin loses pressure, it will cause hypoxia, and passengers will feel dizzy, lose consciousness, and even endanger their lives under hypoxia. In the case of cabin depressurization at different altitudes, the duration of hypoxia that a person can withstand is different. The higher the flight altitude, the less time to withstand. In civil aviation airliners, each person’s seat is equipped with a personal oxygen mask for emergency use, so there is no need to fight to avoid pulling the oxygen mask and delaying use. The oxygen mask is connected to the automatic coupling through a slender rubber oxygen supply tube and bayonet joint. Oxygen continuously flows into the air storage bag of the mask. The gas storage bag first stores gas, and when it expands, it can hold a certain amount of oxygen. When the passenger takes a deep breath to inhale the air storage bag, the intake valve on the mask can let in oxygen. In the event of decompression in the aircraft cabin, the oxygen mask will automatically be thrown down from the cabin roof. Above the passenger seat, there is an emergency manual release of the oxygen mask and a "push" mark. After pushing open, the oxygen mask will automatically lower in front of the passengers. On the release board, there are graphics and text instructions on how to use it. Passengers should follow the instructions correctly. If you need to buy or wholesale oxygen mask mould, please contact us: https://www.medicalmould.net/
    0 Comments 0 Shares
  • Injection steps:

    The first step is to pressurize

    Syringe preparation: Put the syringe into the reducer and place its safety lock in the "safe" position, then close the reducer and pressurize the syringe.

    The second step is to inhale

    One end of the needle of the medicine taking interface is connected with the insulin medicine bottle, and the other end is connected with the medicine tube. Keep the syringe upright and rotate the lower end to the left to inhale the required dose.

    The third step, injection

    Take a relaxed sitting position and hold the syringe vertically and close to the injection site. Press the safety lock with your index finger and press the injection button with your thumb. The injection is complete.

    For more related products, please click here: https://www.medicalmould.net/product/
    Injection steps: The first step is to pressurize Syringe preparation: Put the syringe into the reducer and place its safety lock in the "safe" position, then close the reducer and pressurize the syringe. The second step is to inhale One end of the needle of the medicine taking interface is connected with the insulin medicine bottle, and the other end is connected with the medicine tube. Keep the syringe upright and rotate the lower end to the left to inhale the required dose. The third step, injection Take a relaxed sitting position and hold the syringe vertically and close to the injection site. Press the safety lock with your index finger and press the injection button with your thumb. The injection is complete. For more related products, please click here: https://www.medicalmould.net/product/
    0 Comments 0 Shares
  • Several steps of laboratory plastic ware mould
    Nozzle Melt glue usually flows from the nozzle into the nozzle, but in some Laboratory Plastic Ware Mould, the nozzle is part of the laboratory plastic ware mould because it extends to the bottom of the laboratory plastic ware mould. There are also two main types of nozzles: open nozzles and closed nozzles. In injection laboratory plastic ware moulding production, open nozzles should...
    0 Comments 0 Shares
  • Factors Driving The Three Way Stopcock Market
    The stopcock is a ball valve used to control the flow of liquid or gas in the laboratory. They are available in different forms, where the three-way stopcock is made of polycarbonate and has numerous channels for multiple infusion treatments. The three-way stopcock can withstand pressures up to 5 bar and includes a smooth and fully rotatable faucet. It is mainly used in the intensive care unit...
    0 Comments 0 Shares
  • Medical mould-mould job requirements
    Wear resistance  When the blank is plastically deformed in the mouldcavity, it flows and slides along the surface of the cavity, causing severe friction between the surface of the cavity and the blank, which causes the mouldto fail due to wear. Therefore, the wear resistance of the material is one of the basic and important properties of the mould.  Hardness is the main factor affecting wear...
    0 Comments 0 Shares
  • Three Way Stopcock Structure, Method Of Use
    Click on the connector with 2 female luer ports and a male luer lock. 3 ports have been capped. Color studs are provided, which can be connected for color coding. Usually, the faucet is blue or red, which indicates that the vein or artery is used. Some stopcocks have extension tubes already connected.     Key areas used ITU Highly dependent unit theater Generally all wards...
    0 Comments 0 Shares
  • Vaginal Speculum Mould-Instructions For Vaginal Speculum Operation
    Maintain a comfortable posture   You should practice dilator therapy in an environment free of disturbances and stress-inducing factors. Put yourself in a relaxed state, take a deep breath and exhale slowly. Try muscle breathing [breathing through the abdomen], which helps to relax naturally and open the vaginal wall.   Lie on your back with your knees bent, your feet flat on...
    0 Comments 0 Shares
  • Needleless Injection Site -4 Functions Of The Needleless Connector
    When determining a disinfection plan, it is important to consider the function of the needleless connector in use. Common equipment defects include:It is difficult to disinfect the gap between the valve and the hubComplex contact surfaces are more difficult to disinfectDue to the complexity of multi-part equipment, needleless connectors may hide bacteria inside the valve mechanism but outside...
    0 Comments 0 Shares
  • Meet The Three Way Stopcock
    The three-way stopcock with extension tube should be used with various infusion or infusion equipment in order to connect with any special or general medical equipment to improve ease of use and to introduce drugs to patients. Salient features: The completely transparent body made of medical grade biocompatible polycarbonate can clearly observe the flow of fluid.High-quality anti-kink tube,...
    0 Comments 0 Shares
  • Needleless Injection Site -connection method for needleless connectors
    When connecting an IV or a syringe, there are two methods of connection using a needleless connector. First, you can manually push the IV Luer tip or attached cannula through the split diaphragm. The second option is to remove the IV Luer tip or connected sleeve and lock the Luer to the mechanical valve. Regardless of the method used, do not use actual needles. Since research on the best use...
    0 Comments 0 Shares
More Stories