Peg-12 Dimethicone Manufacturer Introduces What Is A Cloth Wipe


Silicone waterproofing agent is a new type of building waterproofing material, usually applied on the surface of the building in the form of a solution, which can improve the waterproofing effect of the building. Then, PEG-12 Dimethicone Manufacturer will introduce the construction method of silicone waterproofing agent:

The working methods of silicone waterproofing agent are: brush (with a brush), coating (with a sponge), wiping (with cloth), spray (with a low-pressure spray gun), soaking (with a soaking tank), and rolling (with a roller) ), pouring (using utensils) and other seven kinds.

  1. Plastic spraying: The advantages of this type of operation are high operation efficiency and uniform coating distribution. It can be used in large-scale construction, but it consumes a lot of money and costs relatively high.

2. Wetting: The key advantage of this type of operation is that sufficient safety protection can be obtained both inside and outside of the board, and the best safety protection effect can be maintained. It can be used for the treatment of stone, brick and cement products, but Because of the large inhalation of safety protection agents, the cost is relatively high.

  3. Roll coating: This type of method is suitable for large-scale road safety protection operations, and it consumes more when used on walls.

4. Cloth wiping: This type of construction technology is used for the lighter surface of the board. We usually do not recommend this type of operation, but if the amount of use during the coating operation can be enough to protect the board, it is still a better Assignment style.

  5. Sponge coating: This kind of processing technology can be used for the surface treatment of lighter stone, ceramics, etc., and can be coated with a more evenly distributed safety protection agent.

  6. ​​Pouring: This kind of processing technology has high standards for equipment and places.

  7. Brush: This type of processing technology is mainly used for various surface layers, and the amount of use can be manipulated at will. It is a common and better operation method.

Through the above introduction,1,3,5,7-Tetramethylcyclotetrasiloxane Manufacturers hopes that you can simply refer to the content of this article in future use.
Peg-12 Dimethicone Manufacturer Introduces What Is A Cloth Wipe Silicone waterproofing agent is a new type of building waterproofing material, usually applied on the surface of the building in the form of a solution, which can improve the waterproofing effect of the building. Then, PEG-12 Dimethicone Manufacturer will introduce the construction method of silicone waterproofing agent: The working methods of silicone waterproofing agent are: brush (with a brush), coating (with a sponge), wiping (with cloth), spray (with a low-pressure spray gun), soaking (with a soaking tank), and rolling (with a roller) ), pouring (using utensils) and other seven kinds.   1. Plastic spraying: The advantages of this type of operation are high operation efficiency and uniform coating distribution. It can be used in large-scale construction, but it consumes a lot of money and costs relatively high. 2. Wetting: The key advantage of this type of operation is that sufficient safety protection can be obtained both inside and outside of the board, and the best safety protection effect can be maintained. It can be used for the treatment of stone, brick and cement products, but Because of the large inhalation of safety protection agents, the cost is relatively high.   3. Roll coating: This type of method is suitable for large-scale road safety protection operations, and it consumes more when used on walls. 4. Cloth wiping: This type of construction technology is used for the lighter surface of the board. We usually do not recommend this type of operation, but if the amount of use during the coating operation can be enough to protect the board, it is still a better Assignment style.   5. Sponge coating: This kind of processing technology can be used for the surface treatment of lighter stone, ceramics, etc., and can be coated with a more evenly distributed safety protection agent.   6. ​​Pouring: This kind of processing technology has high standards for equipment and places.   7. Brush: This type of processing technology is mainly used for various surface layers, and the amount of use can be manipulated at will. It is a common and better operation method. Through the above introduction,1,3,5,7-Tetramethylcyclotetrasiloxane Manufacturers hopes that you can simply refer to the content of this article in future use.
0 Comments 0 Shares