China Stainless Steel Sink Company Introduces The Requirements For Installing Shower Heads China Stainless Steel Sink Company introduces the precautions for installing shower heads 1. The height of the shower mixing valve from the ground: The distance between the shower mixing valve and the ground is generally controlled within a height range of about 90~100cm. In this interval, we can also fine-tune according to our height. But generally do not exceed 110cm, if it is too high, it may cause the shower riser to be unable to install. 2. The reserved height of the shower faucet: When laying the pipeline, consider the reserved position first, generally 15mm higher than the rough wall, so that the wire head can be buried when the tiles are finished to ensure the beautiful wall. 3. The reserved spacing of the inner wire elbow of the shower head: The general standard for the reserved spacing of the inner wire elbow of the shower head is about 10~15cm. Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/