• China Stainless Steel Sink Company Introduces The Rules For Purchasing Laundry Cabinet


    With the continuous expansion of the scope of use of stainless steel, many laundry cabinets have also begun to use stainless steel as the main material. Below, China Stainless Steel Sink Company introduces the method of purchasing Laundry Cabinet.

    We know that stainless steel is generally used in construction, because it is a relatively hard substance among metal materials, and stainless steel is not easy to corrode, rust or wear. It is resistant to corrosion and high temperature, no matter what temperature it is suitable for. Therefore, the stainless steel washing cabinet also has the above advantages. Let us buy it at once instead of buying a second washing cabinet.

    Environmental protection is also the top priority nowadays. A good home environment will give us a good mood. The stainless steel laundry cabinet is made of epoxy resin and will not emit harmful substances. It has a great environmental protection effect on the home environment. The main thing is that stainless steel has good impact resistance. However, the disadvantage of stainless steel is that the cost is very high, it is difficult to process, and it is also limited by the material, and the cabinet is thin. But this does not affect the degree of popularity of stainless steel laundry cabinets.

    When choosing a stainless steel washing cabinet, you can choose to integrate it with the washing machine, so that it can be used separately. If the washing cabinet will be exposed to the sun for a long time, it is best to install a curtain to block the sun when the washing cabinet is not in use. On the countertop of the washing cabinet, if you choose a ceramic basin, generally choose a smaller size, but it is easy to deform, and the large-size artificial stone will have a longer service life, but the specific material of the countertop is It depends on the actual size of the stainless steel laundry cabinet. When choosing a washing cabinet, you can choose the more practical ones, such as a soap net that can put soap, a pull basket for temporarily putting dirty clothes, and a towel rail for drying towels. And after choosing, see if it matches with your own decoration design.


    Through the above introduction,Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use.
    China Stainless Steel Sink Company Introduces The Rules For Purchasing Laundry Cabinet With the continuous expansion of the scope of use of stainless steel, many laundry cabinets have also begun to use stainless steel as the main material. Below, China Stainless Steel Sink Company introduces the method of purchasing Laundry Cabinet. We know that stainless steel is generally used in construction, because it is a relatively hard substance among metal materials, and stainless steel is not easy to corrode, rust or wear. It is resistant to corrosion and high temperature, no matter what temperature it is suitable for. Therefore, the stainless steel washing cabinet also has the above advantages. Let us buy it at once instead of buying a second washing cabinet. Environmental protection is also the top priority nowadays. A good home environment will give us a good mood. The stainless steel laundry cabinet is made of epoxy resin and will not emit harmful substances. It has a great environmental protection effect on the home environment. The main thing is that stainless steel has good impact resistance. However, the disadvantage of stainless steel is that the cost is very high, it is difficult to process, and it is also limited by the material, and the cabinet is thin. But this does not affect the degree of popularity of stainless steel laundry cabinets. When choosing a stainless steel washing cabinet, you can choose to integrate it with the washing machine, so that it can be used separately. If the washing cabinet will be exposed to the sun for a long time, it is best to install a curtain to block the sun when the washing cabinet is not in use. On the countertop of the washing cabinet, if you choose a ceramic basin, generally choose a smaller size, but it is easy to deform, and the large-size artificial stone will have a longer service life, but the specific material of the countertop is It depends on the actual size of the stainless steel laundry cabinet. When choosing a washing cabinet, you can choose the more practical ones, such as a soap net that can put soap, a pull basket for temporarily putting dirty clothes, and a towel rail for drying towels. And after choosing, see if it matches with your own decoration design. Through the above introduction,Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • China Stainless Steel Sink Company Introduces The Knowledge Of Installing Laundry Cabinets


    China Stainless Steel Sink Company introduces the location requirements of laundry cabinets:

    1. In principle, it is recommended that the water inlet of the faucet and the power plug of the washing machine be placed on the side of the sink, which is about 50cm above the ground. It is more appropriate! Because when the general washing cabinet manufacturers design their products, the back of the sink is empty, which is convenient for the angle valve. There is room for the installation of faucets and the like. In addition, there are usually more double-door cabinets under the sink. If there is a problem with the water and electricity and needs to be repaired, it is easy to open the door.

    2. The faucet and plug of the washing machine are above 1 meter. If you make an integrated cabinet, the plug needs to pass through the countertop and lead to the bottom. There is an opening in the upper left corner of the basin.

    3. Another important position is the location of the drain. The drain is usually dedicated to the washing machine and the sink, which is convenient for installation and prevents overflow during use. Do not leave the drain in the middle of the washing cabinet. It is easy to find a dilemma during installation. If there is only one drain just under the foot of the sink, both sides will become unusable.

    4. It is recommended that the position of the drainer be placed at the back of the sink cabinet, just like the water inlet, so that it is easy to install. Usually, there is very little space available under the washing machine, and the drain pipes are all on the side, so the location of the lower water pipe is best to be on the side of the washing machine.

    Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use.

    https://www.afastainlesskb.com/
    China Stainless Steel Sink Company Introduces The Knowledge Of Installing Laundry Cabinets China Stainless Steel Sink Company introduces the location requirements of laundry cabinets: 1. In principle, it is recommended that the water inlet of the faucet and the power plug of the washing machine be placed on the side of the sink, which is about 50cm above the ground. It is more appropriate! Because when the general washing cabinet manufacturers design their products, the back of the sink is empty, which is convenient for the angle valve. There is room for the installation of faucets and the like. In addition, there are usually more double-door cabinets under the sink. If there is a problem with the water and electricity and needs to be repaired, it is easy to open the door. 2. The faucet and plug of the washing machine are above 1 meter. If you make an integrated cabinet, the plug needs to pass through the countertop and lead to the bottom. There is an opening in the upper left corner of the basin. 3. Another important position is the location of the drain. The drain is usually dedicated to the washing machine and the sink, which is convenient for installation and prevents overflow during use. Do not leave the drain in the middle of the washing cabinet. It is easy to find a dilemma during installation. If there is only one drain just under the foot of the sink, both sides will become unusable. 4. It is recommended that the position of the drainer be placed at the back of the sink cabinet, just like the water inlet, so that it is easy to install. Usually, there is very little space available under the washing machine, and the drain pipes are all on the side, so the location of the lower water pipe is best to be on the side of the washing machine. Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    WWW.AFASTAINLESSKB.COM
    Stainless Steel Shower Head,China Shower Drain Manufacturers
    The strength and durability of stainless steel make stainless steel sink drain and stainless steel shower head the perfect choice for bathroom use. Easy to handle, stainless steel is made in a wide variety of shapes and designs.
    0 Comments 0 Shares
  • China Stainless Steel Sink Company Introduces The Anti-rust Process



    China Stainless Steel Sink Company introduces how to prevent rust in the sink:

    1. The content of alloying elements. Generally speaking, the 10.5% chromium content in steel is not easy to rust. The higher the content of chromium and nickel, the better the corrosion resistance. For example, the content of nickel in the 304 material is 8-10%, and the content of chromium reaches 18-20%. This stainless steel will not rust under normal conditions.

    2. The manufacturer's smelting process will also affect the corrosion resistance of kitchen stainless steel sinks. The large kitchen stainless steel sink factory with good smelting technology, advanced equipment and advanced technology can guarantee the control of alloy elements, the removal of impurities, and the control of the cooling temperature of the billet, so the product quality is stable and reliable, the internal quality is good, and it is not easy to grow. rust. On the contrary, the equipment and technology of some small steel mills are backward. In the smelting process, impurities cannot be removed, and the resulting product will inevitably rust.

    3. The external environment, dry and ventilated environment is not easy to rust. The air humidity is high, continuous rainy weather or the environment with high pH value in the air is easy to rust. 304 stainless steel kitchen sink, if the surrounding environment is too bad, it will rust.

    Through the above introduction, Ningbo AFA Stainless Steel Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.

    https://www.afastainlesskb.com/
    China Stainless Steel Sink Company Introduces The Anti-rust Process China Stainless Steel Sink Company introduces how to prevent rust in the sink: 1. The content of alloying elements. Generally speaking, the 10.5% chromium content in steel is not easy to rust. The higher the content of chromium and nickel, the better the corrosion resistance. For example, the content of nickel in the 304 material is 8-10%, and the content of chromium reaches 18-20%. This stainless steel will not rust under normal conditions. 2. The manufacturer's smelting process will also affect the corrosion resistance of kitchen stainless steel sinks. The large kitchen stainless steel sink factory with good smelting technology, advanced equipment and advanced technology can guarantee the control of alloy elements, the removal of impurities, and the control of the cooling temperature of the billet, so the product quality is stable and reliable, the internal quality is good, and it is not easy to grow. rust. On the contrary, the equipment and technology of some small steel mills are backward. In the smelting process, impurities cannot be removed, and the resulting product will inevitably rust. 3. The external environment, dry and ventilated environment is not easy to rust. The air humidity is high, continuous rainy weather or the environment with high pH value in the air is easy to rust. 304 stainless steel kitchen sink, if the surrounding environment is too bad, it will rust. Through the above introduction, Ningbo AFA Stainless Steel Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    WWW.AFASTAINLESSKB.COM
    Stainless Steel Shower Head,China Shower Drain Manufacturers
    The strength and durability of stainless steel make stainless steel sink drain and stainless steel shower head the perfect choice for bathroom use. Easy to handle, stainless steel is made in a wide variety of shapes and designs.
    0 Comments 0 Shares
  • China Stainless Steel Sink Company Introduces The Requirements For Installing Shower Heads


    China Stainless Steel Sink Company introduces the precautions for installing shower heads

    1. The height of the shower mixing valve from the ground: The distance between the shower mixing valve and the ground is generally controlled within a height range of about 90~100cm. In this interval, we can also fine-tune according to our height. But generally do not exceed 110cm, if it is too high, it may cause the shower riser to be unable to install.

    2. The reserved height of the shower faucet: When laying the pipeline, consider the reserved position first, generally 15mm higher than the rough wall, so that the wire head can be buried when the tiles are finished to ensure the beautiful wall.

    3. The reserved spacing of the inner wire elbow of the shower head: The general standard for the reserved spacing of the inner wire elbow of the shower head is about 10~15cm.

    Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use.

    https://www.afastainlesskb.com/
    China Stainless Steel Sink Company Introduces The Requirements For Installing Shower Heads China Stainless Steel Sink Company introduces the precautions for installing shower heads 1. The height of the shower mixing valve from the ground: The distance between the shower mixing valve and the ground is generally controlled within a height range of about 90~100cm. In this interval, we can also fine-tune according to our height. But generally do not exceed 110cm, if it is too high, it may cause the shower riser to be unable to install. 2. The reserved height of the shower faucet: When laying the pipeline, consider the reserved position first, generally 15mm higher than the rough wall, so that the wire head can be buried when the tiles are finished to ensure the beautiful wall. 3. The reserved spacing of the inner wire elbow of the shower head: The general standard for the reserved spacing of the inner wire elbow of the shower head is about 10~15cm. Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    WWW.AFASTAINLESSKB.COM
    Stainless Steel Shower Head,China Shower Drain Manufacturers
    The strength and durability of stainless steel make stainless steel sink drain and stainless steel shower head the perfect choice for bathroom use. Easy to handle, stainless steel is made in a wide variety of shapes and designs.
    0 Comments 0 Shares
  • Stainless Steel Sink Manufacturers Introduces The Use Skills Of Stainless Steel


    Stainless steel is widely used in life, so Stainless Steel Sink Manufacturers Introduces what are the advantages of stainless steel?

    1. In terms of physical properties, stainless steel is resistant to both high and low temperatures, and the acceptable temperature range is very large. In terms of chemical properties, metals are most afraid of chemical corrosion and electrochemical corrosion, but stainless steel is resistant to chemical corrosion and electrochemistry. Corrosion performance is very good, leading to the alloy.

    2. In terms of process performance, we know that stainless steel should be in many ranges, and is often processed into various plates, pipes, etc., so its plasticity is very strong and suitable for pressure processing. Finally, in terms of mechanical properties, stainless steel has high hardness and strength and is suitable for manufacturing corrosion-resistant and wear-resistant parts. However, the mechanical properties are different depending on the type of stainless steel.
    Therefore, when modern people decorate, most of them will choose stainless steel furniture, such as stainless steel cabinets, Stainless Steel Laundry Cabinet , stainless steel faucets, etc. The common features of these products are long durability, not easy to stain, and very suitable for today's fast-paced life.

    Through the above introduction,Stainless Steel Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.
    https://www.afastainlesskb.com/
    Stainless Steel Sink Manufacturers Introduces The Use Skills Of Stainless Steel Stainless steel is widely used in life, so Stainless Steel Sink Manufacturers Introduces what are the advantages of stainless steel? 1. In terms of physical properties, stainless steel is resistant to both high and low temperatures, and the acceptable temperature range is very large. In terms of chemical properties, metals are most afraid of chemical corrosion and electrochemical corrosion, but stainless steel is resistant to chemical corrosion and electrochemistry. Corrosion performance is very good, leading to the alloy. 2. In terms of process performance, we know that stainless steel should be in many ranges, and is often processed into various plates, pipes, etc., so its plasticity is very strong and suitable for pressure processing. Finally, in terms of mechanical properties, stainless steel has high hardness and strength and is suitable for manufacturing corrosion-resistant and wear-resistant parts. However, the mechanical properties are different depending on the type of stainless steel. Therefore, when modern people decorate, most of them will choose stainless steel furniture, such as stainless steel cabinets, Stainless Steel Laundry Cabinet , stainless steel faucets, etc. The common features of these products are long durability, not easy to stain, and very suitable for today's fast-paced life. Through the above introduction,Stainless Steel Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    WWW.AFASTAINLESSKB.COM
    Stainless Steel Shower Head,China Shower Drain Manufacturers
    The strength and durability of stainless steel make stainless steel sink drain and stainless steel shower head the perfect choice for bathroom use. Easy to handle, stainless steel is made in a wide variety of shapes and designs.
    0 Comments 0 Shares
  • Stainless Steel Sink Manufacturers Introduces The Knowledge Of Cleaning Sink


    Stainless Steel Sink Manufacturers introduces the cleaning strategy of sink

    1. The pipeline is blocked
    If the sink is clogged, close the water pipe first. It is impossible to flush out the impurities with water. For the foreign objects at the drain, you can use waste toothbrushes, iron wires, etc. to pick them out. The general sewer pipe can be removed. When disassembling, pay attention to putting a water basin under the sewage to prevent the sewage from soiling the cabinet. After the sewer pipe is removed, if there are leaves, silt and other debris, you can hook it out with iron wire, etc. If it is greasy and clogged, you can pour hot water first and then dredge it.

    2. Heavy oil stains
    After rinsing the surface of the sink, sprinkle with baking soda to make a paste, apply and rinse off according to the degree of oiliness. Then fill the sink with water and pour white vinegar, or cover the sink with paper towels soaked in white vinegar, and wait for half an hour before removing the paper towels. Then use a nylon sponge dipped in soapy water to clean the sink. Another method is to use the apple cores we eat every day to complete the cleaning work. Cut the core of the fruit, and repeatedly wipe the inner wall of the sink, the pectin in the apple core can remove the oil very well. It is suitable for daily use and can be used as waste without harming the sink.

    3. Strange smell at the drain
    This problem is usually caused by improper sealing of the sewer pipe and floor drain. Seal it with electrical tape or glass glue. Then pull up the hose leading to the lower water pipe, wrap a few layers of plastic wrap on the end of the pipe, and plug it into the lower water pipe.

    4. Floating rust white film
    Floating rust white film appears on the surface of the sink, which can be wiped with toothpaste, talcum powder and rust removing water. Use talcum powder to remove rust spots: put a small amount of talcum powder into a dry sink, and wipe the rust spots with a clean soft cloth; remove with rust-removing water: use a clean soft cloth dipped in a small amount Rub the rust removing water gently on the rust spots.

    5. Easy to dye
    Generally, stone sinks are easy to stain. You can mix flour and detergent to make a paste. Pave the prepared paste on the stained place of the sink. Spread a layer of plastic wrap on the surface overnight, and then remove the plastic wrap. Let the paste dry further to absorb the stain, and then scrape the paste off with a blade. If the stained area appears dark after removing it, you can do it again a week later.


    Through the above introduction, Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.
    Stainless Steel Sink Manufacturers Introduces The Knowledge Of Cleaning Sink Stainless Steel Sink Manufacturers introduces the cleaning strategy of sink 1. The pipeline is blocked If the sink is clogged, close the water pipe first. It is impossible to flush out the impurities with water. For the foreign objects at the drain, you can use waste toothbrushes, iron wires, etc. to pick them out. The general sewer pipe can be removed. When disassembling, pay attention to putting a water basin under the sewage to prevent the sewage from soiling the cabinet. After the sewer pipe is removed, if there are leaves, silt and other debris, you can hook it out with iron wire, etc. If it is greasy and clogged, you can pour hot water first and then dredge it. 2. Heavy oil stains After rinsing the surface of the sink, sprinkle with baking soda to make a paste, apply and rinse off according to the degree of oiliness. Then fill the sink with water and pour white vinegar, or cover the sink with paper towels soaked in white vinegar, and wait for half an hour before removing the paper towels. Then use a nylon sponge dipped in soapy water to clean the sink. Another method is to use the apple cores we eat every day to complete the cleaning work. Cut the core of the fruit, and repeatedly wipe the inner wall of the sink, the pectin in the apple core can remove the oil very well. It is suitable for daily use and can be used as waste without harming the sink. 3. Strange smell at the drain This problem is usually caused by improper sealing of the sewer pipe and floor drain. Seal it with electrical tape or glass glue. Then pull up the hose leading to the lower water pipe, wrap a few layers of plastic wrap on the end of the pipe, and plug it into the lower water pipe. 4. Floating rust white film Floating rust white film appears on the surface of the sink, which can be wiped with toothpaste, talcum powder and rust removing water. Use talcum powder to remove rust spots: put a small amount of talcum powder into a dry sink, and wipe the rust spots with a clean soft cloth; remove with rust-removing water: use a clean soft cloth dipped in a small amount Rub the rust removing water gently on the rust spots. 5. Easy to dye Generally, stone sinks are easy to stain. You can mix flour and detergent to make a paste. Pave the prepared paste on the stained place of the sink. Spread a layer of plastic wrap on the surface overnight, and then remove the plastic wrap. Let the paste dry further to absorb the stain, and then scrape the paste off with a blade. If the stained area appears dark after removing it, you can do it again a week later. Through the above introduction, Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • Stainless Steel Sink Manufacturers Introduces The Selection Method Of Stainless Steel Accessories



    The stainless steel sink is environmentally friendly, hygienic, easy to clean, no dirt, no oil absorption, no discoloration, and often used as new. Moreover, it has the characteristics of wear resistance, high temperature resistance, impact resistance, corrosion resistance, rust resistance, and good toughness (weak elasticity) to protect the tableware from impact without damage. Stainless steel has the characteristics of long service life, light tank body, and easy installation and maintenance. , The following Stainless Steel Sink Manufacturers will introduce how to choose sink accessories?

    1. Not only must there be a good sink, but also the sink's water accessories and auxiliary accessories are also very important.
    2. Choose large-diameter drainage (50mm) environmentally friendly PP or ABS material, with U-shaped downpipe, deodorant, fast drainage, and smoother; good materials have a long life
    3. Choose a large-diameter drain (50mm) double-layer slag-separating stainless steel drain, double-layer filtering, not easy to be blocked, and drainage is smoother
    4. Auxiliary accessories (cutting board, drain blue, etc.) that perfectly match the sink, are more convenient to use.

    Through the above introduction, Stainless Steel Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.
    Stainless Steel Sink Manufacturers Introduces The Selection Method Of Stainless Steel Accessories The stainless steel sink is environmentally friendly, hygienic, easy to clean, no dirt, no oil absorption, no discoloration, and often used as new. Moreover, it has the characteristics of wear resistance, high temperature resistance, impact resistance, corrosion resistance, rust resistance, and good toughness (weak elasticity) to protect the tableware from impact without damage. Stainless steel has the characteristics of long service life, light tank body, and easy installation and maintenance. , The following Stainless Steel Sink Manufacturers will introduce how to choose sink accessories? 1. Not only must there be a good sink, but also the sink's water accessories and auxiliary accessories are also very important. 2. Choose large-diameter drainage (50mm) environmentally friendly PP or ABS material, with U-shaped downpipe, deodorant, fast drainage, and smoother; good materials have a long life 3. Choose a large-diameter drain (50mm) double-layer slag-separating stainless steel drain, double-layer filtering, not easy to be blocked, and drainage is smoother 4. Auxiliary accessories (cutting board, drain blue, etc.) that perfectly match the sink, are more convenient to use. Through the above introduction, Stainless Steel Laundry Cabinet Manufacturers hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares
  • Customization Method Of Lavatory Cabinet

    Many people don't pay enough attention to custom Lavatory Cabinet hardware accessories. In fact, the service life and satisfaction of custom laundry cabinets are usually determined by hardware accessories. Therefore, when customizing the laundry cabinet, you must negotiate with the brand company to use good quality accessories. Good-quality hardware can guarantee the service life of the washing cabinet, while inferior hardware will make the door inflexible, unable to push, and close tightly, which will cause trouble and inconvenience to consumers. At the same time, consumers pay attention to anti-counterfeiting when customizing laundry cabinets, so that they can customize high-quality laundry cabinets. What should be paid attention to when customizing Lavatory Cabinet?

    1. Sign a contract when customizing.
    In order to avoid disputes, don’t forget to sign a contract. The requirements for custom-made cabinets, such as style, material, size, etc., should be specified in writing, and the merchant’s promise should be noted to provide tailor-made service plans to avoid disputes afterwards. After the customized cabinet arrives, you must carefully inspect the goods and pay the balance after confirming that there is no problem.

    2. Be optimistic about after-sales service when customizing.
    In order to avoid problems and no guarantee after the cabinet is used, after-sales service should be optimistic when customizing the cabinet. First understand the brand's comprehensive strength and after-sales service quality and reputation, choose a brand with strong brand strength and good after-sales service, and find a good "nanny" for your customized cabinet.

    Through the above introduction, Stainless Steel Faucets Manufacturers hopes that you can simply refer to the content of this article in future use.
    Customization Method Of Lavatory Cabinet Many people don't pay enough attention to custom Lavatory Cabinet hardware accessories. In fact, the service life and satisfaction of custom laundry cabinets are usually determined by hardware accessories. Therefore, when customizing the laundry cabinet, you must negotiate with the brand company to use good quality accessories. Good-quality hardware can guarantee the service life of the washing cabinet, while inferior hardware will make the door inflexible, unable to push, and close tightly, which will cause trouble and inconvenience to consumers. At the same time, consumers pay attention to anti-counterfeiting when customizing laundry cabinets, so that they can customize high-quality laundry cabinets. What should be paid attention to when customizing Lavatory Cabinet? 1. Sign a contract when customizing. In order to avoid disputes, don’t forget to sign a contract. The requirements for custom-made cabinets, such as style, material, size, etc., should be specified in writing, and the merchant’s promise should be noted to provide tailor-made service plans to avoid disputes afterwards. After the customized cabinet arrives, you must carefully inspect the goods and pay the balance after confirming that there is no problem. 2. Be optimistic about after-sales service when customizing. In order to avoid problems and no guarantee after the cabinet is used, after-sales service should be optimistic when customizing the cabinet. First understand the brand's comprehensive strength and after-sales service quality and reputation, choose a brand with strong brand strength and good after-sales service, and find a good "nanny" for your customized cabinet. Through the above introduction, Stainless Steel Faucets Manufacturers hopes that you can simply refer to the content of this article in future use.
    0 Comments 0 Shares

  • Stainless Steel Sink Manufacturers Introduce The Material Of The Sink


    Stainless Steel Sink Manufacturers introduces the relationship between the thickness of the sink and the life:

    The sinks on the market have a variety of materials, and different materials have different characteristics and styles. How to distinguish between the pros and cons and choose the sink that suits you is also a great knowledge. The shape of the water tank includes round, oval, pentagonal, quarter-arc shape, etc.; the water storage capacity can be adjusted freely for one large and one small tank. Then, let me introduce you to several different kitchen sink purchase methods, and choose the most suitable sink for your family.

    In modern kitchen design, the function of the stainless steel sink has been significantly expanded. For example, a working area is opened up where the sink and the cabinet meet, so that the sink has a storage function. Single tank is often chosen by families with too small kitchen space, which can only meet the most basic cleaning functions; double tank design is widely used in homes, which can meet the needs of cleaning and conditioning separately, and it is also the first choice because of proper space occupation ; Because the three-tank or the mother-and-child tank are mostly special-shaped designs, they are more suitable for large kitchens with individual styles. They have multiple functions such as soaking or washing and storage, and can also separate raw and cooked food, saving time and effort. If the kitchen space is small, single and double stainless steel sinks are more suitable; if you like to wash in a large space, a large single basin sink is a good choice. If the kitchen space is larger, the range of options is wider, and you can choose a three-tank or sink with a drain board.

    From a convenient and practical perspective, you can choose a large and small "child-and-mother" kitchen basin. Such a kitchen basin can freely adjust the water storage capacity during use, and can also drain dry-cleaned dishes and vegetables in a small tank. If space permits, you can also add an extended countertop to place some washing debris.

    From the perspective of saving space, you can choose a pentagonal or quarter-arc kitchen basin. These are specially designed for kitchens with right or round corners, which can make full use of corner space that is usually unusable. From the aesthetic point of view, you can choose individual sinks with different colors to match with various styles of kitchens. The shape can be square, round, ellipse, square and ellipse matched with each other, etc. In addition, the width of the cabinet countertop should be considered when purchasing the sink. The width of the sink should be the cabinet countertop minus 100mm-150mm.

    The above content is organized and shared by Stainless Steel Laundry Cabinet manufacturer, hoping to help those in need.

    Stainless Steel Sink Manufacturers Introduce The Material Of The Sink Stainless Steel Sink Manufacturers introduces the relationship between the thickness of the sink and the life: The sinks on the market have a variety of materials, and different materials have different characteristics and styles. How to distinguish between the pros and cons and choose the sink that suits you is also a great knowledge. The shape of the water tank includes round, oval, pentagonal, quarter-arc shape, etc.; the water storage capacity can be adjusted freely for one large and one small tank. Then, let me introduce you to several different kitchen sink purchase methods, and choose the most suitable sink for your family. In modern kitchen design, the function of the stainless steel sink has been significantly expanded. For example, a working area is opened up where the sink and the cabinet meet, so that the sink has a storage function. Single tank is often chosen by families with too small kitchen space, which can only meet the most basic cleaning functions; double tank design is widely used in homes, which can meet the needs of cleaning and conditioning separately, and it is also the first choice because of proper space occupation ; Because the three-tank or the mother-and-child tank are mostly special-shaped designs, they are more suitable for large kitchens with individual styles. They have multiple functions such as soaking or washing and storage, and can also separate raw and cooked food, saving time and effort. If the kitchen space is small, single and double stainless steel sinks are more suitable; if you like to wash in a large space, a large single basin sink is a good choice. If the kitchen space is larger, the range of options is wider, and you can choose a three-tank or sink with a drain board. From a convenient and practical perspective, you can choose a large and small "child-and-mother" kitchen basin. Such a kitchen basin can freely adjust the water storage capacity during use, and can also drain dry-cleaned dishes and vegetables in a small tank. If space permits, you can also add an extended countertop to place some washing debris. From the perspective of saving space, you can choose a pentagonal or quarter-arc kitchen basin. These are specially designed for kitchens with right or round corners, which can make full use of corner space that is usually unusable. From the aesthetic point of view, you can choose individual sinks with different colors to match with various styles of kitchens. The shape can be square, round, ellipse, square and ellipse matched with each other, etc. In addition, the width of the cabinet countertop should be considered when purchasing the sink. The width of the sink should be the cabinet countertop minus 100mm-150mm. The above content is organized and shared by Stainless Steel Laundry Cabinet manufacturer, hoping to help those in need.
    0 Comments 0 Shares
  • Installation Principles Of Stainless Steel Sink


    General principles for the installation of Stainless Steel Sink :

    Regardless of the structure of the kitchen, the location of the sink should be based on the principle of facilitating the launch of the water, and do not move it randomly to prevent the drain from being blocked.

    Too close to the sink and the stove will cause inconvenience in operation. The safety distance between the two should be considered, and space for items and operations should be reserved. It is best to arrange the refrigerator and the sink side by side, and the stove On the other side, this triangular layout is also the most space-saving design.

    If the kitchen drain is located at the corner, you can design the corner of the cabinet as a washing area with a fan-shaped sink specially adapted to the corner. This way, the pipes are concentrated in the corner cabinet, which greatly increases the storage capacity of the overall cabinet , And more convenient operation.

    If you place the sink in front of the window sill, you must consider whether the height of the faucet affects the opening and closing of the window. If you place the sink on the opposite side of the window sill, you must consider the backlight factor. It is best to have an auxiliary light source above the washing area.

    The space above the sink, whether it is a partition or a pendant, has a strong storage function, and reasonable placement according to categories will make the washing operation more convenient.

    The above content is compiled and shared by the Laundry Cabinet manufacturer, hoping to help those in need.
    Installation Principles Of Stainless Steel Sink General principles for the installation of Stainless Steel Sink : Regardless of the structure of the kitchen, the location of the sink should be based on the principle of facilitating the launch of the water, and do not move it randomly to prevent the drain from being blocked. Too close to the sink and the stove will cause inconvenience in operation. The safety distance between the two should be considered, and space for items and operations should be reserved. It is best to arrange the refrigerator and the sink side by side, and the stove On the other side, this triangular layout is also the most space-saving design. If the kitchen drain is located at the corner, you can design the corner of the cabinet as a washing area with a fan-shaped sink specially adapted to the corner. This way, the pipes are concentrated in the corner cabinet, which greatly increases the storage capacity of the overall cabinet , And more convenient operation. If you place the sink in front of the window sill, you must consider whether the height of the faucet affects the opening and closing of the window. If you place the sink on the opposite side of the window sill, you must consider the backlight factor. It is best to have an auxiliary light source above the washing area. The space above the sink, whether it is a partition or a pendant, has a strong storage function, and reasonable placement according to categories will make the washing operation more convenient. The above content is compiled and shared by the Laundry Cabinet manufacturer, hoping to help those in need.
    0 Comments 0 Shares
No data to show
No data to show
No data to show
No data to show