Zipper reciprocating pull fatigue testing machine is a machine used to test the durability of zippers. It can simulate the frequent pulling of zippers in actual use to judge the durability and reliability of zippers. The machine usually uses an electric drive system to simulate the reciprocating pull of the zipper, and can record the number of reciprocating pulls of the zipper, and whether the zipper is broken, tightened, or the zipper line is broken during the test. More details: https://www.qinsun-lab.com email:info@qinsun-lab.com email:market@qinsun-lab.com Qinsun Instruments Co., Ltd PS: (WLJCDM809)

Fabric Tensile Strength Tester TF001 Fabric Tensile Strength Tester TF001, also known as Tensile Strength Tester TF001, universal testing machine (UTM), universal tensile testing machine, etc. ps: (WLJCDM809)

Quels sont les préparatifs avant le fonctionnement de la chambre d'essai au brouillard salin ? 10-14 ps: (WLJCDM809) https://www.qinsun-lab.com/Products/Property/Accelerated-Laboratory-Testing/

Testeur d'abrasion Martindale en tissu à neuf têtes ASTM D4970 Informations sur le produit de la meuleuse plate en tissu/testeur de résistance à l'abrasion Martindale : ps: (WLJCDM809) https://www.qinsun-lab.com/10.html https://www.standard-groups.com/en/MaterialsTesting/

AATCC Textile Fabric Electric Friction Color Fastness Tester AATCC rubbing color fastness tester is the official testing instrument of American Textile Chemists Association and printing and dyeing workers. The rubbing color fastness tester tests the ability of fabric color to transfer from the material surface to other materials under dry and wet rubbing conditions. In addition to performing color transfer tests, the instrument can perform wear, dry/wet friction, flexure, chalking, dry cleaning, grinding, and other tests. The standard pressure and movement mode are adopted to ensure that the sample conditions are controllable and repeatable. Conforming to the standard: ASTM F1319，AATCC 8/165，BS 1006 DO2，GB/T 3920，,ISO105 DO2/X12，IS LO849，M&S C8/CBA，NEXT TM6 Instrument features: It is used for testing the color fastness of fabrics to dry and wet rubbing, and is suitable for regular or periodic testing. A. Diameter of friction head: 16mm or 25mm; B. Supply pressure: 9N; C. Electric drive, required working voltage 220V; D. Equipped with an electronic counter, it can completely simulate the test results of ten times of manual friction, with high data reproducibility; E. Fixture with standard friction fabric; F. The sample clamp is made of spring steel to ensure fast fastening of the sample; G. Equipment control mode: AATCC, ISO and other standards are set internally, and programs can also be set independently; H. It has automatic alarm function after test. 10-10 ps: (WLJCDM809) https://www.qinsun-lab.com/1097.html https://www.standard-groups.com/en/TextileGarment/

CS8861 Needle Flame Burning Tester Suitable for lighting, low-voltage electrical appliances, household appliances, machine tool appliances, electric motors, electric tools, electronic instruments, electrical instruments, electrical connections, accessories and other electrical and electronic equipment and their components and assemblies. It is also applicable to the research, production and quality inspection departments of electrical and electronic equipment and its components and assemblies, such as insulating materials, engineering plastics or other solid combustible materials. Conformity with standards: Complies with UL1694, IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005 and other standards using a small flame ignition source program simulation test items. Technical parameters: 1. Needle burner: stainless steel, inner hole 0.5±0.1mm, outer diameter sD0.9mm, length 235mm; peal burner angle: vertical (when adjusting and measuring flame height) or tilted 45 (when testing); 3. Burning gas: 95% butane gas or propane gas; 4. Ignition bedding layer: white pine board (10mm thick), covered with a layer of 12~30g/m2 standard silk paper, 200mm±5mm from the flame application 200mm±5mm below the place of flame application; 5. Temperature range: O--1000°C; 6. Flame temperature requirement: from 100±2°C to 700°C±3°C, should be completed within 23.5±1.0s; 7. Flame height: 12mm±1mm, height measuring device; 8. Ignition time: 0s ~999.9s adjustable, generally set to 30s; 9. Holding time: 0s ~999.9s, automatic recording, manual pause; 10-9 Ps: (WLJCDM809) https://www.qinsun-lab.com/165.html https://www.standard-groups.com/en/TextileGarment/

Importance and Benefits of Bursting Strength Tester (BST) Features: Bursting Strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabrics, leather, rexine, etc. UBIQUE Bursting Strength Tester is ideal for testing a wide range of materials to determine their quality, strength and performance. UBIQUE Bursting Strength Tester is easy to operate. It is scientifically calibrated for reliability. It is widely used by industries and institutions and stands out as a proven and reliable equipment. Bursting Strength Tester is available in three types: Board Tester: Fitted with Moulded Rubber Diaphragm to test material with higher burst values like Paperboard, Corrugated Board, Fabric Cloth, etc. (Range: 0-35/70 kg/cm2). Also offered with double pressure gauges (Range: 0 to 7 & 0 to 35/70 kg/cm2) but readings in the lower range are only indicative and not accurate. Paper Tester: Fitted with thin Rubber Diaphragm to accurately test materials having lower burst values like Paper (Range: 0 to 7/10/14 kg/cm2). Two-in-One Paper & Board Tester: Fitted with Thin as well as Moulded Rubber Diaphragms for testing materials with lower as well as higher burst values accurately (Range: 0 to 7/10 & 35/70 kg/cm2). Available in capacities : 0-1000 kgF and 0-2000 kgF. General Features: A precise and reliable machine. Sturdy in construction. Correctly matched motor gives constant pumping rate for better performance, eliminating manual error. Three spare rubber diaphragms and one bottle of hydraulic fluid supplied with machine. All replaceable parts readily available. 10-8 ps: (WLJCDM809) http://www.qinsun-lab.com/885.html https://www.standard-groups.com/en/TextileGarment/